Coated bearings, in which either the inner ring or outer ring has a ceramic coating, are current-insulated bearings. The ceramic layer gives insulation against current passage. ... Nevertheless, bearing damage can be prevented if it is possible to stop or significantly reduce the flow of current.Electrical pitting often occurs in bearings used in electrical equipment, such as motors and power generators, as a result of current leakage. An electrical current present near a bearing can flow to the inside of the bearing, causing sparks that damage the rolling contact surface, ultimately leading to bearing failure. This electrical pitting and can be prevented with coated bearings or ceramic hybrid bearings.Insulated bearings has been specifically designed to counteract electrical pitting. These bearings are available in both ceramic and resin versions that are suited to a variety of applications. Coating the outer ring of the bearing provides a barrier (capable of resisting at least 100 Megaohms at 500 VDC) against any stray currents that would pass through the bearing.